46MM X 77MM FACE MOUNT HANGER ZMAX

$1.56

In Stock100

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. The LUS Double Shear Joist Hanger values engineering at its finest. All hangers in the LUS series have Double-Shear Nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation and the use of standard nails for all connections.

To help with installation speed every LUS Joist Hanger incorporates the Simpson Strong‑Tie Speed Prong feature which is designed to temporarily position and secure the connector for easier and faster installation. 

Please check Corrosion Information if it is suitable for your application.

Material
Carbon Steel or Stainless Steel 1.2mm thick: LUS46 
Carbon Steel 2mm thick: HUS48Z 
Finish
ZMAX® Galvanised: LUS46/77Z; LUS46/118Z; LUS46/166Z; HUS48Z
316 Stainless Steel: LUS46/77SS; LUS46/118SS; LUS46/166SS
Features & Benefits
Stamp of "Double-Shear Nailing" on the side
Patented double-shear nailing design ensures a strong, durable connection (U.S. Patent 5,603,580)
Slit width dome guides the nail into the joist at a 45° angle 
Speed Prongs help to temporarily position and secure the connector for easier and faster installation
Angled joist nailing easier in tight spaces
Designed for greater strength with fewer fasteners to install
Do not bend or remove tabs
The CCN64 Collated Connector Nailer is the perfect companion for the LUS and other Simpson Strong Tie timber connectors to get the job done with ease and in less time
Compatible with Strong-Drive® SD screws
Available in 316 Stainless Steel for outdoor structures and more corrosive environments such as coastal areas
Installation
Use all specified fasteners
Nails must be driven at a 45° angle through the joist or truss into the header to achieve the table loads
Not designed for welded applications
Use SCNR stainless steel nails with LUS stainless steel hangers
LUS hangers cannot be modified (Do not bend or remove tabs)

Add to cart Add to Wishlist

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. The LUS Double Shear Joist Hanger values engineering at its finest. All hangers in the LUS series have Double-Shear Nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation and the use of standard nails for all connections.

To help with installation speed every LUS Joist Hanger incorporates the Simpson Strong‑Tie Speed Prong feature which is designed to temporarily position and secure the connector for easier and faster installation. 

Please check Corrosion Information if it is suitable for your application.

Material
Carbon Steel or Stainless Steel 1.2mm thick: LUS46 
Carbon Steel 2mm thick: HUS48Z 
Finish
ZMAX® Galvanised: LUS46/77Z; LUS46/118Z; LUS46/166Z; HUS48Z
316 Stainless Steel: LUS46/77SS; LUS46/118SS; LUS46/166SS
Features & Benefits
Stamp of "Double-Shear Nailing" on the side
Patented double-shear nailing design ensures a strong, durable connection (U.S. Patent 5,603,580)
Slit width dome guides the nail into the joist at a 45° angle 
Speed Prongs help to temporarily position and secure the connector for easier and faster installation
Angled joist nailing easier in tight spaces
Designed for greater strength with fewer fasteners to install
Do not bend or remove tabs
The CCN64 Collated Connector Nailer is the perfect companion for the LUS and other Simpson Strong Tie timber connectors to get the job done with ease and in less time
Compatible with Strong-Drive® SD screws
Available in 316 Stainless Steel for outdoor structures and more corrosive environments such as coastal areas
Installation
Use all specified fasteners
Nails must be driven at a 45° angle through the joist or truss into the header to achieve the table loads
Not designed for welded applications
Use SCNR stainless steel nails with LUS stainless steel hangers
LUS hangers cannot be modified (Do not bend or remove tabs)